Content is about to be rendered

Customization

Content is about to be rendered

Questions and Answers

Common faults and repair methods of sprayers How to maintain agricultural sprayers

Common faults of the sprayer such as spray can not spray, can not spray evenly and continuously, difficult to trigger the rocker, leakage, inflexible switch, poor atomization quality, no pressure in the air chamber, etc., need to be checked and repaired according to the cause of the fault. In addition to repairing the sprayer, the use of the sprayer should also pay attention to maintenance...

What should I do if the manual sprayer fails? (Common faults and troubleshooting methods are attached.)

1. Spray no fog and dripping. The reason is a casing screen clogging, the second is the nozzle in the diagonal hole clogging. Remove the nozzle to clear the blockage. 2. Spray water and gas sprayed out at the same time. The reason may be the barrel of the liquid delivery tube welding seam de-welding, or liquid delivery tube is corroded by the liquid, this time we can be welded or replaced with a new tube. 3. The spray mist is scattered, not conical. May be due to the shape of the nozzle hole is not correct or blocked by dirt, resulting in poor atomization. At this time we can unscrew the nozzle cap to adjust, while clearing the nozzle hole dirt.

Technical Services